How to Use Non-standard Screws

1. Accurate selection of non-standard screws

Faced with a variety of non-standard screw types, accurate selection is crucial. According to the specific application scenario, it is necessary to carefully consider the key parameters such as the length, thread depth, and model of the screw to ensure that the selected screw perfectly meets the needs and achieves the best fixing effect.

2. Correct use of screwdrivers

When using a screwdriver, be sure to ensure that the tool and the model of the non-standard screw are accurately matched. An unmatched screwdriver is not only difficult to apply force, but may also damage or twist the screw head. In addition, during operation, it is necessary to ensure that the screwdriver head is tightly embedded in the screw groove to achieve stable and efficient rotation to avoid unnecessary damage to the tool or non-standard screw.

3. Detailed points for installing non-standard screws

Matching verification: Before installation, the matching degree of the non-standard screw diameter and the screw hole diameter should be carefully checked to ensure that the thread depth is appropriate. This helps to avoid the problem that the screw cannot be screwed in smoothly or loosens after screwing in.

Strength control: When screwing in non-standard screws, the control of strength is particularly critical. Excessive force may cause the screw to break or the thread to be damaged, while insufficient force can easily cause loosening. Therefore, it is necessary to flexibly adjust the screwing force according to the screw material and installation environment to ensure that the screw is stable and not damaged.

Position selection: The installation location of non-standard screws should give priority to stability. Avoid choosing loose or vibrating locations to ensure that the screws can remain tightened for a long time and effectively prevent loosening due to vibration. At the same time, factors such as temperature changes and humidity must also be considered to ensure the stability and durability of the screws.